Description

The Touch-Free Wall Mounted Sensor is a sensor operated, hands-free tap that is installed above sinks and basins. It operates by sensing a hand, placed within 5 cm of the sensor unit. It uses a beam of invisible Infrared light which, when reflected from hand back to the sensor, operates the unit.

• To turn tap on, place hand in front of sensor for half a second
• To turn off tap, place hand in front of sensor again for half a second
• Valve stays open without hand remaining in the sensor range
• Maximum flow time 45 seconds, reduces waste and overflow if accidentally activated
• Equipped with automatic hygiene flush function (1-10min/24hr) – enabled on request
• Stainless steel sensor plate
• Spout has anti-rotation pin and high Security Torx grub screw, designed to exceed anti-ligature requirements of TS001-2013

INLET & OUTLET

Inlet Connection

15 mm (1/2) BSP

PRESSURE

Recommended Working Pressure

100 – 500 kPa

FLOW RATE

Flow Rate

8 lpm supplied standard. 5 lpm available on request.

TEMPERATURE

Maximum Temperature

70 C C

POWER SOURCE

Operating Voltage	24V DC
Maximum Current	1A
Power Consumption	Less than 10W

IP RATING

Sensor Protection Rating

IP67 for the front panel and sensor lens. No IP rating behind panel.